Home > Interface Modules
SiPM Readout Interface Modules


Provides SiPM bias voltage and amplifier voltages to the AB4 Series and ABL Series SiPM bases
Buffers SiPM signals for an external ADC or oscilloscope
Provides a sum of all SiPM signals for an external trigger or discriminator
Some models connect directly to the MDU Series USB DAQ for remote control and acquisition
Interface boards are low-cost solutions for evaluating the AB4 Series bases


SiPMIM16
16-Channel SiPM Interface Module
  • Connects one ABL series 16-channel SiPM base
  • Connects one AB4 series 4-channel SiPM base using a cable adapter
  • Wideband DC-coupled signal path
  • Buffers 16 SiPM signals for an external ADC
  • Sum of 16 SiPM signals with gain & offset adjust, AC or DC coupling
  • Internal constant-fraction discriminator
  • Precision SiPM bias power supply (model HV80)

Datasheet: SiPMIM16 Datasheet

SiPMIM4-LEMO
4-Channel SiPM Interface Module with LEMO Connectors
  • Connects one AB4 series 4-channel SiPM Base
  • Wideband DC-coupled signal path
  • Buffers 4 SiPM position signals for an oscilloscope or ADC
  • Sums 4 SiPM signals with gain and offset adjust; DC or AC coupling
  • Precision SiPM bias power supply (model HV80)

Datasheet: SiPMIM4 Datasheet

SiPMIM4-BNC
4-Channel SiPM Interface Module with BNC Connectors
  • Connects one AB4 series 4-channel SiPM Base
  • Wideband DC-coupled signal path
  • Buffers 4 SiPM position signals for an oscilloscope or ADC
  • Sums 4 SiPM signals with gain & offset adjust; DC or AC coupling
  • Precision SiPM bias power supply (model HV80)

Datasheet: SiPMIM4 Datasheet

SiPMIB16
16-Channel SiPM Interface Board with LEMO Connectors
  • Connects one AB series 16-channel SiPM Base
  • Wideband DC-coupled signal path
  • Buffers 16 SiPM position signals for an oscilloscope or ADC
  • Sums 16 SiPM signals with gain and offset adjust
  • Requires external amplifier voltage and external bias voltage

Datasheet: SiPMIB16 Datasheet

SiPMIB4-LEMO
4-Channel SiPM Interface Board with LEMO Connectors
  • Connects one AB4 series 4-channel SiPM Base
  • Wideband DC-coupled signal path
  • Buffers 4 SiPM position signals for an oscilloscope or ADC
  • Sums 4 SiPM signals with gain and offset adjust
  • Requires external amplifier voltage and external bias voltage

Datasheet: SiPMIB4 Datasheet

SiPMIB4-BNC
4-Channel SiPM Interface Board with BNC Connectors
  • Connects one AB4 series 4-channel SiPM Base
  • Wideband DC-coupled signal path
  • Buffers 4 SiPM position signals for an oscilloscope or ADC
  • Sums 4 SiPM signals with gain and offset adjust
  • Requires external amplifier voltage and external bias voltage

Datasheet: SiPMIB4 Datasheet

CA4216R4-3606
AB4 to SiPMIM16 Cable Adapter Kit

Datasheet: CA4216R4 Datasheet