Home > USB Data Acquisition
MDU Series High-Performance USB 2.0 Data Acquisition



Summary
  • Uses up to 10 4-channel I/O modules
  • High-speed USB 2.0 interface streams up to 40 MB/s
  • Field-upgradeable FPGA functions
  • Simple register architecture
  • Expansion Port extends FPGA signals to external devices
I/O Customization
  • New I/O modules can be designed quickly
  • Add Expansion Port modules for signal translation, communications, or I/O expansion
FPGA Customization
  • New FPGA functions developed by AiT can be field-programmed over USB
Standardized Register Architecture
  • FPGA functions are accessed through 16-bit registers
  • Single and block transfers are supported
Software Support
  • Firmware updater and utilities
  • Microsoft Windows .NET driver and API
  • LabView VIs and pre-compiled applications
  • C# examples and pre-compiled applications
  • Supports 32-bit and 64-bit Windows OS

MDU20



MDU40


Standard Configuration for SiPM Arrays and Photomultipliers
  • 16 or 32 simultaneous gated integrators with a 12-bit simultaneous sampling ADC per channel
  • Sustains trigger rates up to 1.2 MHz for 16 channels and 600 kHz for 32 channels
  • Connects directly to one or two SiPMIM16 interface modules


MDU20-GI16
16-channel simultaneous gated integrators with PMT control
  • Controls one SiPMIM16 Interface Module
  • Up to 1.2 MHz trigger rate acquiring 16 channels
  • 32KB event data FIFO
  • Programmable gate width, 10ns resolution
  • 32-bit event count, 48-bit 10ns time stamp
  • 100 ns analog delay per channel
  • Four input offset DACs
MDU40-GI32
32-channel simultaneous gated integrators with dual PMT control
  • Controls two SiPMIM16 Interface Modules
  • Up to 600 kHz trigger rate acquiring 32 channels
  • 128KB event data FIFO
  • Programmable gate width, 10ns resolution
  • 32-bit event count, 48-bit 10ns time stamp
  • 100 ns analog delay per channel
  • Eight input offset DACs